English
PriceList for Multi channel meter module - JSY1013 Embedded electrical parameter sensor – JIAN SI YAN Featured Image
  • PriceList for Multi channel meter module - JSY1013 Embedded electrical parameter sensor – JIAN SI YAN
  • PriceList for Multi channel meter module - JSY1013 Embedded electrical parameter sensor – JIAN SI YAN
  • PriceList for Multi channel meter module - JSY1013 Embedded electrical parameter sensor – JIAN SI YAN

PriceList for Multi channel meter module - JSY1013 Embedded electrical parameter sensor – JIAN SI YAN

Description:


Product Detail

Product Tags

Related Video

Feedback (2)

It is a good way to improve our products and service. Our mission is to develop creative products to customers with a good experience for Detection-Type Intelligent Pdu , Three Phase Power Analyzer , Ac Power Meter , While using the tenet of "faith-based, customer first", we welcome customers to phone or e-mail us for cooperation.
PriceList for Multi channel meter module - JSY1013 Embedded electrical parameter sensor – JIAN SI YAN Detail:

Description

The sensor can be conveniently embedded in the appliance to measure the voltage, current, power and power consumption of the appliance in real time. The appliance can evaluate the working condition of the appliance through the analysis of real-time electrical parameters.

Industry applications: electrical energy metering sockets, smart switches, household appliances, energy-saving monitoring and other electrical products and other electrical monitoring products.

Technical Parameter

1. Single phase AC input
1) Voltage range: 0~100v, 220V, etc. (other voltage ranges can be customized).
2) Current range: 0.001~10a manganese copper sampling direct type (other current ranges can be customized).
3) Rated frequency: 45~65hz.
4) Signal processing: special metering chip is adopted, and 24 bit AD is adopted.
5) Overload capacity: 1.2 times the range is sustainable; The instantaneous (<20ms) current is 5 times, the voltage is 1.5 times, and the range is not damaged.
6) Input impedance: voltage channel >1k Ω /v, current channel ≤ 100m Ω.

2. Communication interface
1) Interface type: provide UART communication interface.
2) Communication protocol: MODBUS-RTU protocol.
3) Data format: software can set “n, 8,1″, “E, 8,1″, “O, 8,1″, “n, 8,2″.
4) Communication rate: baud rate can be set at 1200, 2400, 4800, 9600bps; The baud rate of communication interface is 9600bps by default, and the format is “n, 8,1″.

3. Measurement data output
Voltage, current, power, power factor, frequency, electric energy and other electrical parameters.

4. Measurement accuracy
Voltage, current and power: ≤ 1.0%; Active kwh level 1

5. Power supply
When dc+3.3v power supply, typical power consumption: ≤ 20mA.

6. Working environment
1) Working temperature: -20~+70 ℃; Storage temperature: -40~+85 ℃.
2) Relative humidity: 5~95%, no condensation (at 40 ℃).
3) Altitude: 0~3000 meters.
4) Environment: a place without explosion, corrosive gas and conductive dust, and without significant shaking, vibration and impact.

7. Temperature drift
≤100ppm/℃

8. Installation method
Embedded installation, can provide packaging

9. Module size
23*23mm, pin spacing 2.54mm

Product detail pictures:

PriceList for Multi channel meter module - JSY1013 Embedded electrical parameter sensor – JIAN SI YAN detail pictures

PriceList for Multi channel meter module - JSY1013 Embedded electrical parameter sensor – JIAN SI YAN detail pictures

PriceList for Multi channel meter module - JSY1013 Embedded electrical parameter sensor – JIAN SI YAN detail pictures

Related Product Guide:
We also offer product sourcing and flight consolidation services. We have our own factory and sourcing office. We can provide you with almost every type of product related to our product range for PriceList for Multi channel meter module - JSY1013 Embedded electrical parameter sensor – JIAN SI YAN, The product will supply to all over the world, such as: Accra, Stuttgart, Johannesburg, With the development and enlargement of mass clients abroad, now we have set up cooperative relationships with many major brands. We have our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the "quality first, customer first, We are provideing high-quality, low-cost products and first-class service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.
    • The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 Stars By Mario from Mexico - 2017.10.27 12:12
    The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
    5 Stars By Sophia from Thailand - 2018.11.22 12:28

    RELATED PRODUCTS